Felling Utility Pole Trailers are available with payload capacities of 7,980-36,600 pounds. They are available in 20 foot retracted to 30 foot extended, 24 foot retracted to 40 foot extended and 29 foot retracted to 46 foot extended lengths. Electric brakes are standard and all can be equipped with air brakes if needed.

Equipped with a 2 inch cold rolled steel, positive locking adjustment pin and designed with a notched flange welded on the pin, the flange notches have to pass through two tabs welded 90 degrees from each other, assuring a positive locked position. The 2 inch positive locking adjustment pin is attached to the trailer with a chain to prevent loss.

The Utility Pole Trailers are equipped standard with center and rear, full width, double c-channel bolsters with sliding, lever locking removable stanchions. There is a lynchpin with a lanyard attached at each end of the bolster. A 45 inch wide front bolster with a 4 inch strap and binder is standard. Optional 60 and 95 inch wide front bolsters are available.

For more information, please visit www.Felling.com.